
Earrings
Slim rectangle hoops
Check delivery availability
Delivery availability is not yet confirmed.
Shipping costs and taxes require a confirmed quote.
Details, styling and care
Straight edges and softened corners frame these rectangular hoops in rhodium-finished sterling silver. Their stated 15 × 10.7 mm dimensions offer a compact alternative to round hoops.
Straight edges with softened corners
The preserved introduction describes rectangular hoops whose straight sides meet softened corners. That outline offers a different visual rhythm from a round hoop without adding a separate drop or charm. A plain collar can leave the geometry clear, while a small smooth stud in a neighbouring piercing can provide a quieter shape. Begin with the rectangular pair alone so you can assess the outline against your own ear and usual hairstyle.
Look from the side as well as the front when comparing the shape with other earrings. A rectangle can occupy space differently from a circle with a similar overall height. The softened corners describe the retained design, not a guarantee against snagging or a claim that the frame can be bent. Rectangular also does not establish a hinge, a particular post position or an adjustable opening. Those practical details need their own confirmation.
Show less
The title names silver, while rhodium remains unconfirmed
The exact supplier title identifies sterling silver rectangle hoop earrings. The preserved introduction additionally describes a rhodium finish, but no retained product-level specification confirms that coating. The available evidence is title-only, so silver fineness, actual finish and the selected variant remain to be verified. A silver-coloured appearance cannot settle whether the surface is rhodium-plated, unplated or finished in another way.
No coating thickness, complete alloy composition, total weight or construction diagram is supplied. Straight metal-looking sides do not prove solid rather than hollow construction or a particular resistance to bending. Stone information is unknown rather than independently confirmed absent. Keep the inherited wording separate from a newly verified material claim, and do not fill the missing specifications with details from another rectangular hoop that happens to look similar.
The stated dimensions are not a complete fitting guide
The preserved introduction gives dimensions of 15 x 10.7 mm. A retained product-level measurement does not corroborate them, so they remain stated inherited information rather than a fresh verified size. Confirm the measurement axes and actual outside dimensions before using them to compare the pair with your usual hoops. The figures do not also establish frame thickness, internal clearance, post position or the space needed behind the ear.
Ask for the fastening type, post measurements, backing material and operating instructions. Do not pull a straight side outward to open the pair unless that is the confirmed intended method. Support the appropriate fastening area rather than squeezing opposing corners. If you wear another earring nearby, compare the actual side profiles and available piercing spacing; an outline drawn on paper cannot reproduce the depth or resting angle against your lobe.
Keep the geometric outline clear during wear
Hair tucked behind the ear can reveal the complete rectangle, while loose hair may show only a short reflective edge. Choose the arrangement that suits your preference and check it while turning your head. A high collar or scarf should not repeatedly catch a corner. Put the earrings on after clothing likely to snag them, and release trapped fibres gently instead of pulling the frame through the fabric.
Care should follow the confirmed silver and finish information for the actual pair. Until that is available, do not assume abrasive polish, chemical dips or ultrasound are suitable for every component. Store the earrings separately so other jewellery cannot press against the rectangular outlines or catch the fastenings. If a side, corner or closure changes, seek assessment before further wear rather than straightening it by hand. Finish and dimensions still require exact product confirmation.



