
Earrings
Freeform Teardrop Studs
Preliminary price · taxes and delivery subject to confirmation
Gold-tone studs with an open teardrop outline, an uneven ribbon-like edge and a broader lower curve for a fluid, sculptural silhouette.
Check delivery availability
Delivery availability is not yet confirmed.
Shipping costs and taxes require a confirmed quote.
Details, styling and care
An uneven gold-tone ribbon traces an open teardrop, widening along the lower curve and meeting at a pointed top. Gentle changes in the contour give these studs a fluid outline, with the open center preserving the shape's airy character.
An open teardrop traced by an uneven ribbon
The widening lower curve and pointed top give these studs a teardrop outline without filling the centre with a broad surface. Gentle changes in the ribbon create a less regular shape than a simple wire loop. A plain blouse leaves that open centre visible, while a smooth round ring can provide a different contour. The selected Yellow Gold option adds a warm metal tone; it does not change the distinction between the wider lower section and the narrower meeting point above.
Compare the shape with your intended hairstyle and collar, especially from the side. A nearby earring can sit inside the visual opening from one angle and overlap the ribbon from another. Try the studs alone before adding a second motif. Freeform and irregular describe the appearance, not a verified hand-forming method or a promise that every pair is individually unique. The open design also does not mean the ribbon should be widened or pulled into another shape.
Show less
Gold-plated silver with unspecified stone information
For the selected Yellow Gold option, the supplier declares 925 sterling silver with 18K yellow gold plating and backs described as solid 925 sterling silver. The gold is a surface layer over the silver base, not the material throughout the whole earring. The retained specification contains no explicit main-stone or accent-stone entry. That omission does not establish confirmed stone absence, and no additional material should be invented from the open appearance.
The supplier gives a total weight of 2.55 g. The material, finish and weight are declared specifications rather than independent laboratory results or a measurement of the delivered pair. Coating thickness and full alloy composition are not supplied. Solid-silver wording does not establish whether every part of the ribbon is internally filled. A smooth, broad-looking curve is also not evidence of resistance to bending, permanent finish durability or universal suitability for sensitive ears.
Overall dimensions and the separate fastening details
The listed earring size is 13.5 by 24.5 mm. These are overall measurements, not a complete description of ribbon width, thickness, opening size or post position. A paper outline beside a known stud can help compare the height and space near a collar, but it cannot show how far the front projects from the lobe. Ask for the relevant component measurements if you need clearance beside another piercing or a close-fitting accessory.
The source specifies silver backs but does not give their exact mechanism, replacement dimensions or the length and thickness of the posts. Follow the instructions for the actual pair, supporting the metal near the fastening instead of pulling the pointed top or broad lower curve. Check that the back holds securely without pressing tightly against the lobe. The open centre and stated total weight do not guarantee comfort for every wearer or compensate for an uncertain backing.
Preserve the changing width of the ribbon
Let the uneven contour remain the main detail rather than filling its open centre with another overlapping earring. Put the pair on after clothing likely to catch around the point or curve and remove it before changing a tight top. Keep hair loops and scarf threads away from the opening. If fabric does catch, loosen it carefully instead of pulling the teardrop away from the ear. The fluid appearance should remain a visual quality rather than an invitation to flex the metal.
Allow cosmetics to dry before wear and remove the earrings for bathing, swimming, exercise and sleep. Use a soft dry cloth for light marks, without assuming abrasive polishing, chemical dips or ultrasound are suitable for the complete plated assembly. Store the pair with its backs in a separate soft compartment. If a post, backing or ribbon section changes after a knock, set the pair aside for assessment instead of bending the point or pressing the lower curve back into place.



